Содержание
- 2. content 1、 Product introduce..………..p3-p4 2、 Disassembly guide ……….p5-p17 3、Structure parts diagram…..p18 4、 Repairing guide …………...p19-p29
- 3. Product introduce
- 4. Product introduce Model : Product size:134*67*10.25 Platform:MTK6572,dual-core 1.2GHz Memory: 4GB+4Gb (Nand&sdram+RAM) System:Android 4.2 Frequency band: WCDMA:900/2100,GSM:900/1800MHz
- 5. Hot gun 1. Tools list Tweezer /Cross screw driver/ Solder/Tommy bar/hot gun Disassembly guide
- 6. 2. Battery caver disassembly open the battery cover,as the Fig. 1 Fig. 1 Disassembly guide Battery
- 7. 3. Back caver disassembly 1) Unscrew 12 screws in back cover ,as the Fig.2; Fig. 2
- 8. Fig. 3 2) Disassemble back cover with Tommy bar ,as the Fig.3; Disassembly guide Back cover
- 9. 4.Main board and front cover disassembly 1)The main components of distribution,as the fig.4; Fig.4 Disassembly guide
- 10. 2)remove two screws and open the LCD con.& TP con. ,and remove the volume key FPC
- 11. 3)open the main board and remove the RF cable con. And main FPC con..as the FIG.6
- 12. remove the light sensor and camera,as the fig.7; 5. Front and Back camera & light sensor
- 13. Fig.9 remove the Speaker camera and receiver,as the FIG.9; 7. Speaker & receiver disassembly Disassembly guide
- 14. Fig.10 8. RF cable and Main FPC disassembly Remove the RF cable and Main FPC ,as
- 15. Fig.11 9. Sub PCBA disassembly remove the sub PCBA from the ,as the fig.11; Disassembly guide
- 16. Fig.12 10.MIC disassembly Remove the MIC,as the fig.12; Disassembly guide MIC con.
- 17. Structure parts diagram 3in1 module (LCD, TP & front cover Back cover Battery cover Main PCBA
- 18. Repairing guide 1. LCD a. Check if the SW is correct, otherwise to upgrade the SW;
- 19. 2. Camera a. Checking the camera is assemble ok, re-assemble the camera and test; b. Using
- 20. 3. TP a. Checking the SW and upgrade the SW; b. Checking the FPC of TP
- 21. 4.Ring a. Checking the shrapnel of speaker if is ok; b. Checking the resistance of speaker
- 22. 5.receiver a. Checking the shrapnel of receiver if is ok; b. Checking the resistance of receiver
- 23. a. Checking the MIC and Vibrator is cold soldering, re-solder it; b. Change the MIC and
- 24. a. Checking the shrapnel of earphone if is ok; b. Checking the connector point on the
- 25. a. Checking the voltage of battery if is 3.8-4.2V and connect ok; b. Upgrade the SW;
- 26. a. Checking the voltage of battery if is over 3.4V; b. Checking the charger and USB
- 27. Checking the connector of T –card and SIM card; Change the connector of T –card and
- 28. a. Checking RF line if that is broken; b. Checking RF line assemble if is ok;
- 30. Скачать презентацию