User Manual

This scooter has been designed and perfected for two years by our senior engineers.
This scooter features fashionable appearance, light weight, simple structure,
convenient folding and easy operation. It is economical and practical.
For your driving safety and serving you better, you should read this user manual
before using this product.
Please do not use or borrow it to others until you learn about product performance
and operation instruction.

Foreword

P1
II. Overall structure …… …… …… …… …… …… …… …… P2
III. Basic parameters and performance … …… …… …… …… P3
IV. Meter description …… …… …… …… …… …… …… …… P4
V. Electrical wring diagram…… …… …… …… …… …… …… P5-P6
VI. Battery and charger …… …… …… …… …… …… …… … P7
VII. Use and installation of other accessories …… …… …… P8-P11
VIII. Common failures and maintenance …… …… …… …… P12
IX. Quality commitment …… …… …… …… …… …… …… … P13-P15
X. Packing list …… …… …… …… …… …… …… …… …… P16
XI. Dealer information …… …… …… …… …… …… …… ……P17

Table of Contents

and feet can reach the ground easily.
Confirm whether the mechanical brake is normal, the tyre is filled fully and accessories are in good condition.
Confirm installation positions of accessories and learn about relevant functions.
If the ebike is used for the first time, please try to ride it for a distance when ensuring that the surrounding traffic environment is safe. Ride it on road after you can control the scooter well.
This product is a riding vehicle within a short distance on urban roads. It is not suitable for being used in poor road and weather conditions (such as raining, snowing or icy pavement). It cannot be used in outdoor extreme sports and performances.
When the environment temperature is below -5 ℃,it will have a certain impact on battery discharging. Therefore, charging should be conducted in room temperature.
The riding mileage of this product is measured under 25℃,70kg loading and smooth-riding surface. It might vary due to different riders’ weights, riding habits, environment temperature and pavement environment.

I. Precautions before use

1

Folding slip joint
5. Horn and headlamp switch
6. Brake handle for power disconnection
7. LCD display
8. Rolling handle
9. Folding quick release
10. Adjustable saddle
11. Charging socket
12. Rear light
13. Removable battery
14. Rear fender
15. Hub motor
16. Chainwheel
17. Pedal
18. Kick stand
19. Headlamp

13

18

19

it every 25-30 days.

VI. Battery and charger

Use of charger:
Steps:
1. Connect charger with battery connector well.
2. Connect charger battery plug to 220V mains supply socket.
3. After full charging, pull out power plug and then pull off charger connector.
Precautions:
Please use the original charger for charging. If other charger or poor charger is used personally, it might cause fire, explosion or other hidden dangers.
Input voltage and output voltage are 220V and 42V respectively. The charger connector has 1 positive electrode and 3 negative electrodes. Please don’t disassemble or connect it inversely. Don’t use those batteries with different voltages.
Red light is for charging state, and green light or flickering is for full charging.
The charger can only be used for charging indoors. It should be kept away from rain, water, long-term sunshine and violent vibration.
If the charger cable skin is damaged or its shell is broken, please replace the cable in time. Don’t open, disassemble or continue to use it, otherwise there will be a electrical shock hazard.

7

for handle installation:
Loosen screw A and take the spiale cup off.
Don’t pull out the front fork to avoid any missing of accessories.
Fix the handle bar as shown on the picture.
Pre-tighten screw A. It is used to adjust steering flexibility, so it cannot be locked forcibly.
After adjusting the handle direction, lock screw B tightly (two screws in left and right sides).

A

B

Spiale cup

(2) Steps for rear fender installation:
Tighten the fender screw as picture for both sides

position on the frame, push side A first, then push side B, turn the key to make the battery pack fixed in.
Note: Special attention should be paid to the battery pack, not to allow any conductive objects to contact the battery negative electrode copper, to avoid short circuit caused by spontaneous combustion or explosion.

10

1 2 3 4 5

1. Battery negative
2. Taillight negative
3. Taillight signal
4. Taillight positive
5. Battery positive

slightly to make the bolt trip out.

After making it in place, the quick release lever will return automatically. Press the lever and pull it downwards

11

Angle adjustment of saddle

Force direction for folding

Direction for unfolding with force

joint gets loose.
Voltage is too low.
Cable is damaged and broken.
Rolling handle is damaged.
Controller is damaged.
Motor Hall is damaged.

Battery cannot be charged
Charger connector gets loose.
Charger is damaged.
Battery pack is damaged.

Abnormal sound shock absorber
Shock absorber spring lubrication is invalid.
Shock absorber sleeve gets loose

Maintenance tips:
1. Don’t park the scooter outdoors in an exposed state. Avoid direct sunshine or rainwater. If rainwater enters the scooter and its accessories, short circuit will be caused.
2. Check the tyre abrasion regularly and brake block abrasion. Check whether every joint gets loose.
3. Try to avoid the following circumstance that charging is conducted after the battery is used up.

12

serial No. on the warranty card must be consistent with that on the scooter. The warranty period will commence from the earlier date between the invoice date and the product activation date. If the initial date for warranty cannot be presented, the ex-factory date will be considered as the initial date for warranty which is used to judge whether the product is within the valid warranty period.
2. If there is any product performance problem within 7 days after it is sold, customers may choose to maintain, replace or return after such problem is confirmed.
3. If there is any product performance problem within 15 days after it is sold, customers may choose to maintain or replace after such problem is confirmed.
4. If there is any product performance problem from sales date to warranty period, our company will provide free maintenance service after such problem is confirmed.
5. Within warranty period, the following circumstances will not in the free maintenance scope:
. The total mileage of the scooter has been up to 2,000km.
. Any damage caused by installation or use arising from failure to follow the requirements in user manual.
. Product serial No. is deleted or modified.
. The product serial No. or model on the warranty card is not consistent with the product itself.
. The product is disassembled or maintained not by our authorized personnel.
. Natural abrasion (including vehicle housing, handle, tyre and gearbox etc.) which does not affect product function.
. Product damage caused by accidental factors or improper use (such as mechanical damage, falling and impact) .
. Any damage caused by overloading and extreme sports.
. Any damage caused by fire, liquid soaking, earthquake, abnormal storage or force majeure.
. Loss of quick-wear parts such as packing material and various technical data.
. Failures or damage caused by those factors unrelated to product design, technology and quality etc.
6. We provide paid maintenance service for the faulty products exceeding the warranty period.

13