DFM-Star_10TMK+Star_20TMK-220724

Август 3, 2022

Главная
Разное
DFM-Star_10TMK+Star_20TMK-220724

Содержание

2. Parting line Cor. side Cav. side PL Cor. side Cav. side PL The red line is
3. The red line is parting line. Parting line Cor. side Cav. side PL Cor. side Cav.
4. Injection gate ABS 50% PP and 50% TPE Switching runner ￠5 0.6mm Gate position reduce 0.6mm
5. Ejector structure Ejector pin
6. Cavity /Core Side Draft angle analysis Cor. side Cav. side PL Cor. side Cav. side PL
7. Cavity / Core Side Draft angle analysis Cor. side Cav. side PL Cor. side Cav. side
8. Thickness analysis Because of the shrinkage of the thickness, we suggest reducing some wall thickness to
9. Thickness analysis Because of the shrinkage of the thickness, we suggest reducing some wall thickness to
10. Visible surface Surface Finish: 400#
12. Скачать презентацию

Слайд 2

Parting line
Cor. side
Cav. side
PL
Cor. side
Cav. side
PL
The red line is parting

line.

Слайд 3

The red line is parting line.
Parting line
Cor. side
Cav. side
PL
Cor.

side

Cav. side

PL

Слайд 4

Injection gate
ABS
50% PP and 50% TPE
Switching runner
￠5
0.6mm
Gate position reduce 0.6mm plastic

injection

Three plate mold / cold runner pin point gate

Слайд 5

Ejector structure
Ejector pin

Слайд 6

Cavity /Core Side Draft angle analysis
Cor. side
Cav. side
PL
Cor. side
Cav. side
PL
No draft

in green area,suggest reducing plastic and draft angle 3 degree to release the tool,is that OK?

Middle area green face no draft,propose to add 0.5 degree on core side,is that OK?

Слайд 7

Cavity / Core Side Draft angle analysis
Cor. side
Cav. side
PL
Cor. side
Cav. side
PL
No

draft in green area,suggest reducing plastic and draft angle 2 degree to release the tool, is that OK?

Middle area green face no draft,propose to add 0.2 degree on core side,is that OK?

Слайд 8

Thickness analysis
Because of the shrinkage of the thickness, we suggest reducing

some wall thickness to improve it.

Average thickness:3.56
Maximum thickness:12.00

Слайд 9

Thickness analysis
Because of the shrinkage of the thickness, we suggest reducing

some wall thickness to improve it.

Слайд 10

Visible surface
Surface Finish: 400#