Содержание
- 2. GENERAL INFORMATION
- 3. The red line is the parting line PL, please confirm.
- 4. Cavity Insert parting line
- 5. Core Insert Pin parting line
- 6. Lift Insert parting line Lift
- 7. Slide 1 Insert parting line Slide3 Slide1 Slide2 Slide4
- 8. Slide 2 Insert parting line Slide3 Slide1 Slide2 Slide4
- 9. Slide 3 Insert parting line Slide3 Slide1 Slide2 Slide4
- 10. Slide 4 Insert parting line Slide3 Slide1 Slide2 Slide4
- 11. Slide Insert parting line
- 12. 此位置尖点式热咀进胶 Hot nozzle injection in this place
- 14. 图示红色面出后模是倒扣. 建议超减叫后模做0度与上图箭头指示红色线(行位分型)对齐 We suggest aligning with the red lines indicated by the arrow in the above
- 15. 箭头指示黄色面为行位与后模孔位的插穿面。 建议向行位方向做5度减胶拔模 We suggest reducing 5°, please confirm
- 16. 如图示因产品空间有限,斜顶侧面到扣位侧面钢料只有0.5mm 建议扣位侧面(红色面)减胶0.3mm(2侧同改) The part space is limited, we suggest to red face reduce 0.3mm.(Both change 2
- 17. Thick wall will bring sink marks and deformation, please notice.
- 18. Ejector PinØ3.5
- 19. 顶针和斜顶都在产品后模深腔内,将无法完全自动脱落产品. 请确认.谢谢 Ejectors and sliders are in the deep of core, product can not automatically from
- 20. 资料显示外观面为晒纹VDI21。请提供哪些面为外观面。谢谢 Technical Assignment for Design wrote surface texture VDI21, please remark which positions are visible surfaces.
- 22. Скачать презентацию