HW Repair Guide GT-N5100 (Galaxy Note 8.0)

Содержание

Слайд 2

1. All functionality, features, specifications and other product information provided in

1. All functionality, features, specifications and other product
information provided in this document including, but not limited 
to, the benefits, design, pricing, components, performance, 
availability, and capabilities of the product are subject to change 
without notice or obligation. Samsung reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Samsung to provide notification of such change.
2. In data

of our company, important management / technical information is included, and if it is leaked, loss can happen in various aspect such as closing a technology gap, increasing ability to respond.  
Therefore, it is strictly prohibited from information leak or forwarding this material, and if leak of management / technical information due to disobeying the law happens, it can be severely punished in accordance with information protection rule of our company.

NOTICE

Слайд 3

Contents Introduction of GALAXY Note 8 Service Guide RF calibration IMEI

Contents

Introduction of GALAXY Note 8
Service Guide
RF calibration
IMEI writing
Block Diagram
Repair Guide
Assembly &

Disassembly
Electronic Components
SMD parts
Trouble Shooting
Q&A
Слайд 4

Introduction of GALAXY Note 8.0 Specification This model is the portable

Introduction of GALAXY Note 8.0

Specification

This model is the portable media Tablet

device and it has 8 inches size.
So, it expected to replace the diary and it has S-pen, S-planner, S-Note, etc.
Слайд 5

RF calibration(1/3) Please download the latest version of RF Calibration program

RF calibration(1/3)

Please download the latest version of RF Calibration program on

the PLM System. (Daseul Launcher, Runtime and Model File)

Run Calibration program

Check the Calibration and select correct file

Click the Extract & Run button

Check the CAL

Check and
select correct file

Click the Start button

Слайд 6

RF calibration(2/3) Check the Calibration Check the System Config items Click

RF calibration(2/3)

Check the Calibration

Check the
System Config items

Click the
Model Information

Type

the correct H/W version

Check the connection port of
Phone, MSTS and Power Supply

Click the
Hardware Config

Click the
OK button

Слайд 7

Click the Start button and connect the phone to Anyway Jig.

Click the Start button and
connect the phone to Anyway Jig.

RF

calibration(3/3)

The Result bar is changed to the GREEN color if the calibration is Passed.

Слайд 8

IMEI Writing (1/3) Please download the latest version of RF Calibration

IMEI Writing (1/3)

Please download the latest version of RF Calibration

program on the PLM System. (Daseul Launcher, Runtime and Model File)

Run Daseul program for IMEI writing.

Check the IMEI
and select correct file

Click the Extract & Run button

Check the IMEI

Check and
select correct file

Click the Start button

Слайд 9

IMEI Writing (2/3) Check the IMEI Write and IMEI Check Check

IMEI Writing (2/3)

Check the IMEI Write and IMEI Check

Check the
System

Config items

Click the
Hardware
Config

Check the connection port of
Phone and Power Supply

Check the
OK button

Слайд 10

IMEI Writing (3/3) Type the correct IMEI number Click the Model

IMEI Writing (3/3)

Type the correct IMEI number

Click the Model Info

Type the

correct Software, Hardware, CSC, PDA and SKU_CODE etc.

Click the Start button and connect the phone to Anyway Jig.

The Status bar is changed to
GREEN color if IMEI writing is Passed

Слайд 11

Block Diagram

Block Diagram

Слайд 12

Assembly & Disassembly Instruction

Assembly & Disassembly Instruction


Слайд 13

Assembly & Disassembly Instruction

Assembly & Disassembly Instruction

Слайд 14

Assembly & Disassembly Instruction

Assembly & Disassembly Instruction

Слайд 15

Assembly & Disassembly Instruction

Assembly & Disassembly Instruction


Слайд 16

Assembly & Disassembly Instruction

Assembly & Disassembly Instruction

Слайд 17

Assembly & Disassembly Instruction

Assembly & Disassembly Instruction

Слайд 18

Electronic Components SPK(L) Module Main Antenna TSP connector SIM card socket

Electronic Components

SPK(L) Module

Main Antenna

TSP connector

SIM card socket

SD card socket/ Motor module

 GH42-03975A

5M
CAM

1.3M

CAM

Receiver/
3.5pi Ear Jack/
Light-Proximity
sensor Module

Sub MIC/
Power-volume key/ IrDA Module

S-Pen

LCD connector

11pin sub PCB
(including SPK(R) connector and Home key FPCB connector

SPK(R)/
Main MIC
Module

BT/WIFI/GPS
Antenna
(on the rear cover)

WACOM
connector

 GH42-03977A

 GH59-12911A

 GH96-06106A

 GH96-05974A

 GH59-12906A

 GH59-12908A

 GH59-12907A

 GH59-12910A

 GH59-13117A

 GH59-13124A

 GH59-12919A

Home key FPCB

 GH59-13128A

 GH98-25480A

Слайд 19

SMD parts (TOP side) OSC200 2805-001098 Oscillator – 26MHz UME600 1107-002190

SMD parts (TOP side)

OSC200 2805-001098
Oscillator – 26MHz

UME600 1107-002190
MoviNAND

U701 1203-007657
PMIC

UCD400 1205-004510
Audio CODEC

U1001

1204-003387
IrDA IC

Ant100, Ant101 3712-001375
Ant. Contact (for GSM, WCDMA)

U900 1209-002142
Magnetic Sensor

U201 1205-004649
GPS IC (inside of shield-can)

HDC900 3708-002222
Connector (5M Camera)

U702 1203-006346
Reset IC

Слайд 20

SMD parts (Bottom side) U106 1209-002006 Grip Sensor IC U1008 1205-004674

SMD parts (Bottom side)

U106 1209-002006
Grip Sensor IC

U1008 1205-004674
WACOM IC

Ant202, Ant203 3712-001375
Ant.

Contact (for BT, WIFI, GPS)

HDC500 3711-007173
Connector (SD card & Motor)

SLC1000 3708-003131
Connector (WACOM)

F100 2911-000236
Antenna Switch Module

U203 1205-004598
Bluetooth & WIFI IC
(inside of shield-can)

HDC1000 3711-006923
Connector(Power & Vol & IrDA)

HDC901 3711-006925
Connector (1.3M Camera)

HDC402 3711-007188
Connector (Receiver & Ear Jack & Light-Proximity sensor)

U104 1203-007333
PAM DCDC

U705 1203-007321
IF PMIC

C1013 1205-004233
MHL IC

HDC400 3711-008347
Connector (SPK-L)

HDC300 3711-008347
Connector (SIM)

UCP600 0902-002996
Application Processor

BTC700 3711-008421
Connector (Battery)

UME300 1105-002212
Mobile DDR SDRAM

SLC900 3708-002781
Connector (TSP)

UCP300 1205-004511
Call Processor

PAM100 1201-003400
Power Amplifier Module

U105 1203-006801
Transceiver DCDC

OSC100 2801-005166
DCXO – 26MHz

U100 1205-004515
Transceiver

F101 2910-000190
SAW Duplexer

U904 1205-004521
TSP IC

U901 1209-002153
Acc. Sensor

HDC800 3711-007295
Connector (LCD)

IFC500 3711-006843
Connector (11pin sub PCB)

Слайд 21

Power problem

Power problem

Слайд 22

Power problem Step5 Step6 U701 C754 C736 C727 C755 AP_PS_HOLD(TP) C705 OSC700

Power problem

Step5

Step6

U701

C754

C736

C727

C755

AP_PS_HOLD(TP)

C705

OSC700

Слайд 23

Charging

Charging

Слайд 24

Charging Step2, 3 U705 Charging IC C763

Charging

Step2, 3

U705
Charging IC

C763

Слайд 25

RF(GSM/WCDMA)

RF(GSM/WCDMA)

Слайд 26

RF(GSM/WCDMA) Step4 F100 ASM U100 Transceiver F101 SAW Duplexer PAM100 PAM

RF(GSM/WCDMA)

Step4

F100 ASM

U100
Transceiver

F101
SAW Duplexer

PAM100 PAM

OSC100
DCXO – 26MHz

Main Antenna

Слайд 27

SIM card detection problem

SIM card detection problem

Слайд 28

SIM card detection problem Step2, 3, 4 SIM socket R330 R331 HDC300 SIM socket connector

SIM card detection problem

Step2, 3, 4

SIM socket

R330

R331

HDC300
SIM socket connector

Слайд 29

Microphone Problem

Microphone Problem

Слайд 30

Microphone Problem Step2, 3 Check the MIC hole and rubber Step4

Microphone Problem

Step2, 3

Check the MIC hole and rubber

Step4

Check the MIC FPCB

status

Step5

U401

C413

Слайд 31

Speaker Problem

Speaker Problem

Слайд 32

Speaker Problem Step3 Right Speaker + Main MIC Left Speaker Check

Speaker Problem

Step3

Right Speaker
+ Main MIC

Left Speaker

Check the
SPK connector

Check the
SPK

connector

L406

L407

C105

C106

Step5

Слайд 33

BT/WIFI Problem

BT/WIFI Problem

Слайд 34

BT/WIFI Problem You can check the this layout if open the

BT/WIFI Problem

You can check the this layout
if open the shied

cover

Step1

Step2, 3, 4

Step2

BT/WIFI Antenna

ANT202, ANT203

Check the turn on

C233

C250

C251

OSC201

U203
BT/WIFI IC

Слайд 35

GPS/GLONASS Problem

GPS/GLONASS Problem

Слайд 36

GPS/GLONASS Problem Step1 Check the turn on Step2 BT/WIFI Antenna Step3,

GPS/GLONASS Problem

Step1

Check the turn on

Step2

BT/WIFI Antenna

Step3, 4

ANT202, ANT203

C209

C211

L200

C200

C201

U201
GPS IC

U200

OSC200

Слайд 37

Display Problem

Display Problem

Слайд 38

Display Problem Step2, 3, 4 HDC800 LCD Connector Step2 LCD connector

Display Problem

Step2, 3, 4

HDC800
LCD Connector

Step2

LCD connector FPCB

C800

C801

U800

C806

C804

U802

Слайд 39

Touch Problem

Touch Problem

Слайд 40

Touch Problem Step2, 3, 4, 5 SLC900 TSP Connector C913 Step2

Touch Problem

Step2, 3, 4, 5

SLC900
TSP Connector

C913

Step2

LCD connector FPCB

U902

C902

C903

U904
Touch Sensor IC

ZD903

ZD904

ZD905

R682

R683

R908

Слайд 41

S-Pen Problem

S-Pen Problem

Слайд 42

S-Pen Problem Step2 S-Pen connector FPCB

S-Pen Problem

Step2

S-Pen connector FPCB

Слайд 43

5M CAM Problem

5M CAM Problem

Слайд 44

5M CAM Problem

5M CAM Problem

Слайд 45

1.3M CAM Problem

1.3M CAM Problem

Слайд 46

1.3M CAM Problem

1.3M CAM Problem

Слайд 47

OTG Problem

OTG Problem

Слайд 48

OTG Problem Step2 U705 C763 Step3 Step4 Sub PCB U504 C506

OTG Problem

Step2

U705

C763

Step3

Step4

Sub PCB

U504

C506

Слайд 49

MHL Problem

MHL Problem

Слайд 50

MHL Problem Step2, 3 C1013 MHL IC L1000 L1001 C1006 C1010 U1003 U1004

MHL Problem

Step2, 3

C1013
MHL IC

L1000

L1001

C1006

C1010

U1003

U1004