Operators 413/415. Electromechanical operators for swing gates

Содержание

Слайд 2

OPERATOR 413

OPERATOR 413

Слайд 3

TECHNICAL SPECIFICATIONS Operator with “OFF-AXIS” thrust Available in versions 230V and

TECHNICAL SPECIFICATIONS

Operator with “OFF-AXIS” thrust
Available in versions 230V and 24V
Available

in versions with limit switch
Built-in mechanical stop for opening and closing
Coupling of the half-bodies by gasket
Aluminium body completely double coated guaranteeing a higher resistance to atmospheric agents
Worm screw in stainless steel
Bronze transmission crown gear
Слайд 4

Release device –key protected and easy to operate Numbered locks 1-36 (optional) OPERATOR 413

Release device –key protected and easy to operate
Numbered locks 1-36 (optional)


OPERATOR 413

Слайд 5

Limit switch 24 Vdc power supplied to guarantee the highest security

Limit switch 24 Vdc power supplied to guarantee the highest security
Possibility

for management of “stops” and “slow down”
Easy adjustment of the limit switches through access from the top

OPERATOR 413

Слайд 6

Horizontal cable exit for installations close to the ground Predisposition for

Horizontal cable exit for installations close to the ground
Predisposition for the

use of the “Gatecoder” deceleration kit

OPERATOR 413

Слайд 7

RANGE 413

RANGE 413

Слайд 8

OPERATOR 415

OPERATOR 415

Слайд 9

TECHNICAL SPECIFICATIONS Operator with “IN-AXIS” thrust Available in versions 230V and

TECHNICAL SPECIFICATIONS

Operator with “IN-AXIS” thrust
Available in versions 230V and 24V
Available

in versions with rod stroke 300 mm (3m) and 400mm (4m)
Available in versions with limit switch
Coupling of the half-bodies by gasket
Aluminium body completely double coated guaranteeing a higher resistance to atmospheric agents
Available in versions with limit switch
Rod in stainless steel
Слайд 10

Horizontal cable exit for installations close to the ground Predisposition for

Horizontal cable exit for installations close to the ground
Predisposition for the

use of the “Gatecoder” deceleration kit

OPERATOR 415

Слайд 11

OPERATOR 415 (with carter optional)

OPERATOR 415 (with carter optional)

Слайд 12

Release device –key protected and easy to operate Numbered locks 1-36 (optional) OPERATOR 415

Release device –key protected and easy to operate
Numbered locks 1-36 (optional)


OPERATOR 415

Слайд 13

Limit switch 24 Vdc power supplied to guarantee the highest security

Limit switch 24 Vdc power supplied to guarantee the highest security
Possibility

for management of “stops” and “slow down”
High precision micrometric limit switches, frontal adjustment

OPERATOR 415 (LS models)

Слайд 14

Horizontal cable exit for installations close to the ground Predisposition for

Horizontal cable exit for installations close to the ground
Predisposition for the

use of the “Gatecoder” deceleration kit

OPERATOR 415

Слайд 15

RANGE 415

RANGE 415

Слайд 16

TECHNICAL REPORT SWING GATE OPERATOR ANALYSIS AMI A180 ATI A3000

TECHNICAL REPORT
SWING GATE OPERATOR ANALYSIS
AMI A180
ATI A3000

Слайд 17

vs 413 CAME BX-A 1) See the test results AMI A180

vs

413

CAME BX-A

1) See the test results

AMI A180

Слайд 18

AMI A180

AMI A180

Слайд 19

PROTECTION CLASS IP

PROTECTION CLASS IP

Слайд 20

Connection terminal board Stator Limit switch power supply 230V PROTECTION IP

Connection
terminal board
Stator

Limit switch
power supply
230V

PROTECTION IP

Слайд 21

Very few protection of the reduction gearing due to type of

Very few protection of the reduction gearing due to type of

cover and lack of joints

PROTECTION IP : COVER CARTER

Слайд 22

Electric limit switch only in opening, INTERFERES IN THE MOTOR PHASE,

Electric limit switch only in opening, INTERFERES IN THE MOTOR PHASE,

PROTECTION CLASS IP20. In the instructions no indications are mentioned, no instructions about the use or adjustment range

ELECTRIC LIMIT SWITCH

Слайд 23

The worm screw is made of “normal” steel and protected only

The worm screw is made of “normal” steel and protected only

by a burnishing treatment (normally used only for internal components).

WORM SCREW

Слайд 24

Functioning test executed on gate LP001 2m leaf weight kg. 360

Functioning test executed on gate LP001 2m leaf weight kg. 360


Start test 23-09-04
End of test 25-10-’04 after 26.510 cycles
Operator out of order for breaking of front part, the breaking concerns not the bracket but the reduction gearing, therefore the entire operator has to be changed.

“LIFE” TEST AMI A 180

Слайд 25

vs 415 CAME BX-A 1) See the test results ATI A3000

vs

415

CAME BX-A

1) See the test results

ATI A3000

Слайд 26

AMI A3000 AMI A5000

AMI A3000
AMI A5000

Слайд 27

NB.: no models available with mechanical stops ANALYSIS TECHNICAL SPECIFICATIONS

NB.: no models available with mechanical stops

ANALYSIS TECHNICAL SPECIFICATIONS

Слайд 28

PROTECTION IP

PROTECTION IP

Слайд 29

Concept and matching of the carter imply low protection of the

Concept and matching of the carter imply low protection of the

complete reduction group.

H2O

IP PROTECTION CLASS

Слайд 30

The normative requires expressly that “the apparatus needs to be provided

The normative requires expressly that “the apparatus needs to be provided

with fixing devices for the cable so that the wire is protected from traction and torsion forces…” which certainly is not happening with the ATI product. In this case the cable is passing with a certain number of curves inside in order to guarantee traction resistance, which IS NOT IN ACCORDANCE WITH THE NORMATIVE. Further in the CAME instructions no indications are given for the cable connection, there is just a schema for connection to the terminal board.

Cable
entrance

Cable
exit

MOTOR CABLE CONNECTION AND ITS RESISTANCE TO WRENCH

Слайд 31

MOTION TRANSMISSION BETWEEN ROTOR AND EPICYCLOIDAL REDUCTION Motion transmission between rotor

MOTION TRANSMISSION BETWEEN ROTOR AND EPICYCLOIDAL REDUCTION

Motion transmission between rotor

e epicycloidal reduction through plastic junction with non matching dimensions
Слайд 32

Epicycloidal reduction, locking system through electro brake. The electrobrake keeps the

Epicycloidal reduction, locking system through electro brake. The electrobrake keeps the

rotor stopped by friction, therefore all the thrusts on the gate are supported by the epicycloidal reduction gearing.

EPICYCLOIDAL REDUCTION

Слайд 33

The motor lock is given by the electric brake acting on

The motor lock is given by the electric brake acting on

the rotor, while the release through key acts on the outer crown.
Rotating the key the outer crown gets free of the epicycloidal reduction and allows the movement of the leaf.
AGAINST
A problem due to this solution is given by the fact that, when you use the max. thrust, that key rotation could be extremely tough.
The gearing are subject to external loads and thus need to be dimensioned in appropriate way
FOR
An advantage of this solution is given by the fact that you can, through freeing the electro brake, action the release by a bauden cable (external release box)
NB. On the CAME price list is mentioned as accessory a release box to release the system with a cable, but this is not indicated in the instructions.

RELEASE SYSTEM

Слайд 34

ELECTRIC LIMIT SWITCH Electric limit switch in version 230V INTERFERES ON

ELECTRIC LIMIT SWITCH

Electric limit switch in version 230V INTERFERES ON

THE MOTOR PHASE, PROTECTION CLASS IP20.
Слайд 35

REGULATION OF THE ELECTRIC END TRAVELS In order to regulate the

REGULATION OF THE ELECTRIC END TRAVELS

In order to regulate the

electric limit switches, it is necessary to take away the release cover protection before taking off the front cover.
Слайд 36

WORM SCREW The worm screw is made of “normal” steel and

WORM SCREW

The worm screw is made of “normal” steel and

protected only by a burnishing treatment (normally used only for internal components).
Слайд 37

The screw covering solution, although it does not guarantee an efficient

The screw covering solution, although it does not guarantee an efficient

protection against screw oxidation, can be appreciated because it allows to cover the screw.
Further in case of CAME, where the screw oxidizes very quickly, this allows to hide to the user the problems with the screw.

SCREW COVERING

Слайд 38

Execution test of functioning on gate LP011 with 4m leaf and

Execution test of functioning on gate LP011 with 4m leaf and

weight kg. 250
Start 1° test: 17-12-’04
End test 22 – 12 - ’04 after 2.217 cycles due to breaking of coupling
Start 2° test: 04-03-’05
End test 07 – 03 - ’05 after 1.350 cycles due to breaking of coupling

“LIFE” TEST ATI 5000

Слайд 39

TECHNICAL REPORT SWING GATE OPERATOR ANALYSIS PLUTO PL4005 MOBY 4006 WINGOKIT

TECHNICAL REPORT
SWING GATE OPERATOR ANALYSIS
PLUTO PL4005
MOBY 4006
WINGOKIT

Слайд 40

MOBY

MOBY

Слайд 41

vs 415 CAME BX-A 1) See the test results MOBY MB4005

vs

415

CAME BX-A

1) See the test results

MOBY MB4005

Слайд 42

Max. leaf for serie 5000 with max. length m 3,75 For

Max. leaf for serie 5000 with max. length m 3,75
For leaf

max.m. 5: in order to reach the leaf length you have to use the whole stroke

NB. Moby does not have mechanical stops in opening/closing; only available in version with limit switch. The 24V version has mech. stop only in opening.

ANALYSIS “MOBY” OPERATOR

Слайд 43

H2O entrance H2O entrance H2O entrance H2O entrance PROTECTION IP

H2O entrance

H2O entrance

H2O entrance

H2O entrance

PROTECTION IP

Слайд 44

The Moby model range exists only in version with electric limit

The Moby model range exists only in version with electric limit

switches, BY INTERRUPTING THE PHASE, the version with mechanical stop has not been contemplated
Only the 24 V version has the mechanical stop IN OPENING, but without electric limit switch and the encoder has been introduced in the basic model.

AVAILABLE ONLY IN VERSION WITH ELECTRIC LIMIT SWITCH “ no mechanical stops ”

Слайд 45

The “exclusive” Nice release is certainly easy to operate, but unfortunately

The “exclusive” Nice release is certainly easy to operate, but unfortunately

it remains in up position when activated and considering the “exclusive” water seal system, this is not an optimal solution. Otherwise you need to deactivate the release to permit any movement

M
O
B
Y

PLUTO

WINGO

THE EXCLUSIVE Nice RELEASE EASY TO USE

Position of the release device when activated

Слайд 46

• Worm screw in normal steel and grease as only protection

• Worm screw in normal steel and grease as only protection (Contrary

to the FAAC screws which are in STAINLESS STEEL)

MOBY

PLUTO

WINGO

WORM SCREW IN NORMAL STEEL

Слайд 47

Execution of functioning test on gate LP011 with leaf m 2,50

Execution of functioning test on gate LP011 with leaf m 2,50

and weight kg. 200
Start test 05-12-’03
End of test 02-02-’04 after 26.425 cycles due to breaking of fixing of female screw

LIFE TEST MOBY MB 4006

Слайд 48

Entrata H2O Entrata H2O Entrata H2O Entrata H2O PROTECTION OF THE INTERNAL MECHANICS

Entrata H2O

Entrata H2O

Entrata H2O

Entrata H2O

PROTECTION OF THE
INTERNAL MECHANICS

Слайд 49

The worm screw is in normal steel and the protection is

The worm screw is in normal steel and the protection is

guaranteed only by the grease used for initial greasing ( please notice that the screws used by Faac are in STAINLESS STEEL)

Oxidation starts very quickly

WORM SCREW IN NORMAL STEEL

Слайд 50

The “exclusive” Nice release is certainly easy to operate, but unfortunately

The “exclusive” Nice release is certainly easy to operate, but unfortunately

it remains in up position when activated, and considering the opening on the body, this is not an optimal solution. Otherwise you need to deactivate the release to permit any movement

Position of the release device when activated

RELEASE DEVICE

Слайд 51

WINGO

WINGO

Слайд 52

vs 413 CAME BX-A 1) See the test results WINGOKIT

vs

413

CAME BX-A

1) See the test results

WINGOKIT

Слайд 53

Remark : Among the use restrictions with leaf weight and leaf

Remark : Among the use restrictions with leaf weight and leaf

length has been indicated that ”with panelled gate and in wind conditions, the mentioned values could be reduced considerably

ANALYSIS “WINGO” OPERATOR

Слайд 54

Entrance H2O Protection class IP42, please see the water signs in

Entrance H2O

Protection class IP42, please see the water signs in the

motor cable area

To replace the inner condenser it is necessary to open the motor reducer

REPLACEMENT OF CONDENSER

IP 43 PROTECTION

Слайд 55

H2O entrance H2O entrance H2O entrance PROTECTION IP

H2O entrance

H2O entrance

H2O entrance

PROTECTION IP

Слайд 56

The worm screw is in normal steel and the protection is

The worm screw is in normal steel and the protection is

guaranteed only by the grease used for initial greasing ( please notice that the screws used by FAAC are in STAINLESS STEEL)

WORM SCREW IN NORMAL STEEL

Слайд 57

The cable connection is situated in the area of the fixation

The cable connection is situated in the area of the fixation

pin on the bracket without any separation between terminal board and pin.
NB. In the Nice presentation this issue is mentioned as merit. See “the area for connexions, easy accessible form top” emphasizing “The protected position of the power cable”
The cable sleeve only guarantees a water protection ; in the meantime water enters in the upper part protected by a small cover without any joint

ELECTRIC CONNECTION OF THE OPERATOR

Слайд 58

The “exclusive” Nice release is certainly easy to operate, but unfortunately

The “exclusive” Nice release is certainly easy to operate, but unfortunately

it remains in up position when activated, and considering the opening on the body, this is not an optimal solution. Otherwise you need to deactivate the release to allow any movement

Position of the release device when activated

RELEASE DEVICE

Слайд 59

NB. The water you see inside entered with closed release. The

NB. The water you see inside entered with closed release. The

plastic carter protection is useless and doesn’t prevent water falling directly on screw and bearing
It’s clear that the customer must re-close the lock each time a manual operation takes place, otherwise the quantity of water inside could be even higher.

Entrance H2O

RELEASE DEVICE

- Предыдущая
Вакцинопрофилактика
Следующая -
ВНИИБТ - буровой инструмент. Инструкция

Похожие презентации

ССАВЦІ. ОЗНАКИ БУДОВИ
Das deutschmobil
Міжнародні конфлікти
Аҫаба башҡорт өс нәмәне белергә тейеш: ырыуының шәжәрәһен, хандар тураһында риүәйәттәрҙе, өләңдәрҙе, йондоҙҙарҙы танырға
Графический дизайнер. Виды работ
Музеи Татарстана
Клиническая иммунология
Moskau ist die Hauptstadt Russlands
Спектрально-корреляционный анализ детерминированных радиотехнических сигналов
Философия управления персоналом. Школы философии управления персоналом
Повторить вопросы Демократические выборы народных депутатов РСФСР; Декларация о государственном суверенитете России; Первы
Построение таблиц истинности
Основные элементы базовой нотации языка UML
Растревоженная душа В. Шукшина. К 90 – летию писателя
Infinitif + окончания. Futur simple
Микроволны СМВ диапазона
Ремонт гидравлического гасителя колебаний
Франция
Программирование на языке С++
Общесудовые системы
Болашаққа уміт отын ұялатқан - Елбасы
Мой национальный костюм. Кимоно
Chesapeake Bay Bridge-Tunnel
РИМСКОЕ ПРАВО
Опыт реновации жилищного фонда на примере зарубежного опыта
Система управления финансовыми рисками
Палехские шкатулки
Автор Дудова Любовь Анатольевна Учитель начальных классов ГОУ № 246 Приморского района Санкт-Петербурга
Вы можете прислать нам Вашу презентацию и мы опубликуем ее на сайте.
Обратная связь
Для правообладателей
Email: Нажмите что бы посмотреть