[email protected] /5 CapSense

Содержание

Слайд 2

PSoC@3/5 CapSense PSoC Creator 4.2 Designing with PSoC 3/5

PSoC@3/5 CapSense

PSoC Creator 4.2 Designing with PSoC 3/5

Слайд 3

CapSense

CapSense

Слайд 4

CapSense

CapSense

Слайд 5

CapSense

CapSense

Слайд 6

CapSense

CapSense

Слайд 7

CapSense

CapSense

Слайд 8

CapSense

CapSense

Слайд 9

CapSense

CapSense

Слайд 10

CapSense

CapSense

Слайд 11

CapSense

CapSense

Слайд 12

CapSense

CapSense

Слайд 13

CapSense Overview: Activate and use the 2 CapSense buttons and linear

CapSense

Overview:

Activate and use
the 2 CapSense buttons and linear slider


on the DVK board
and
output the results
to the LCD Character screen and Leds.
Слайд 14

CapSense Objective: For button presses, to indicate which button is on

CapSense

Objective:

For button presses, to indicate which button is on by

Leds.
For the slider, to display the centered position of the finger on the slider is hexadecimal format and horizontal bar.
Слайд 15

Модулі PSoC@3/5

Модулі PSoC@3/5

Слайд 16

Модулі PSoC@3/5

Модулі PSoC@3/5

Слайд 17

CapSense Follow the below steps to do this: The Lab already

CapSense

Follow the below steps to do this:
The Lab already has

the LCD Character component installed and configured.
Add a CapSense component from the component catalog.
In the general tab, configure the CapSense component as in the image below
Слайд 18

Lab_3 CapSense

Lab_3 CapSense

Слайд 19

CapSense In the general tab configure the CapSense component

CapSense

In the general tab configure the CapSense component

Слайд 20

CapSense In the clock source tab, configure the CapSense component

CapSense

In the clock source tab, configure the CapSense component

Слайд 21

CapSense

CapSense

Слайд 22

CapSense In the buttons tab, configure the component

CapSense

In the buttons tab, configure the component

Слайд 23

CapSense In the sliders tab configure the component

CapSense

In the sliders tab configure the component

Слайд 24

CapSense

CapSense

Слайд 25

CapSense In the scan slots tab, configure the buttons (BTN_B1 and BTN_B2)

CapSense

In the scan slots tab, configure the buttons (BTN_B1 and BTN_B2)


Слайд 26

CapSense In the scan slots tab configure the slider elements (LS_SL1_e0-to-4)

CapSense

In the scan slots tab configure the slider elements (LS_SL1_e0-to-4)

Слайд 27

CapSense Configure the pins tab in the .cydwr file

CapSense

Configure the pins tab in the .cydwr file

Слайд 28

Creator

Creator

Слайд 29

File – New - Projekt

File – New - Projekt

Слайд 30

Empty PSoC 3 Design

Empty PSoC 3 Design

Слайд 31

Configure LCD

Configure LCD

Слайд 32

Configure CSD

Configure CSD

Слайд 33

Configure CSD

Configure CSD

Слайд 34

Configure CSD

Configure CSD

Слайд 35

Configure CSD

Configure CSD

Слайд 36

Configure CSD For CY8CKIT-030 and CY8CKIT-050: Reassign the CapSense LinearSlider and

Configure CSD
For CY8CKIT-030 and CY8CKIT-050: Reassign the CapSense LinearSlider and Buttons

in the ‘Pins’ tab of the Design-wide Resources file to port 5. To be precise, reassign the 5 Slider segments to P5[4:0], Button0 to P5[5], and Button1 to P5[6]. Also ensure that the Cmod capacitor is assigned to P6[4] in the pins tab of the Design Wide Resources (.cydwr) file in PSoC Creator.
Слайд 37

Lab_3.cywr

Lab_3.cywr

Слайд 38

Lab_3 Main.c

Lab_3 Main.c

Слайд 39

Lab_3 Main.c_2

Lab_3 Main.c_2

Слайд 40

Lab_3 Main.c_3

Lab_3 Main.c_3

Слайд 41

Lab_3 Main.c_4

Lab_3 Main.c_4

Слайд 42

Lab_3 Main.c_5

Lab_3 Main.c_5

Слайд 43

Lab_3 Main.c_6

Lab_3 Main.c_6

Слайд 44

Lab_3 CapSense Expected output on LCD

Lab_3 CapSense
Expected output on LCD

Слайд 45

Lab_3 CapSense References [1] Application Note AN2233a, “Capacitive Switch Scan,” Cypress

Lab_3 CapSense

References
[1] Application Note AN2233a, “Capacitive Switch Scan,” Cypress Semiconductor


[2] Application Note AN2403, “Signal-to-Noise Ratio Requirement for CapSense Applications,” Cypress Semiconductor
[3] Application Note AN2292, “Layout Guidelines for PSoC CapSense,” Cypress Semiconductor
[4] Application Note AN2398, “Waterproof Capacitive Sensing,” Cypress Semiconductor
[5] Application Note AN2360, “Power Consumption and Sleep Considerations with CapSense,” Cypress Semiconductor
Слайд 46

Lab_3 CapSense References (continue) [6] Application Note AN2318, “EMC Design Considerations

Lab_3 CapSense

References (continue)
[6] Application Note AN2318, “EMC Design Considerations for PSoC

CapSense Applications,” Cypress Semiconductor
[7] Application Note AN2394, “CapSense Best Practices,” Cypress Semiconductor
[8] Application Note AN2397, “CapSense Data Viewing Tool,” Cypress Semiconductor
Слайд 47

Приклади застосування МК PSOC На сайті фірми Cypress знаходиться більше 200

Приклади застосування МК PSOC

На сайті фірми Cypress знаходиться більше 200 Application

Notes і Reference Designs, які ілюструють області застосування мікроконтролерів PSoC.