Рrogramming of tool for DNC

-The value is 222 -then, press the enter button

Level must be 2

Press empty button

1-Write six 2-And write six, step to that button

-Enter the punch angle

The knife (85)

-(hp) is height of punch

-rp=(0.8) Radyus is always same -Ton/m This is always 100 Ton/m

1-Give the number for the punch

2-Press enter button to save

move the

ATTENTİON !

-if you see 'exists' message -First, press to this button

-Enter this value to that secment

-This is die angle

hd

-This is die height

-This radius depends on (ve) value ve=? (8-16) enter rd=1.8 (16-25)

-This is always 100 Ton/m for our machine

-Safety distance should be (Ve/2)

-(a) value should be half measurement of die width (die/2)

This is bottom table

-(b) Value should be half measurement of bottom table width (bottom

1-Enter a number for the die

2-Press enter button to save

cursor is