Powder /Water / Concentration Adjustment and Other questions

Сентябрь 14, 2022

Главная
Алгебра
Powder /Water / Concentration Adjustment and Other questions

Содержание

2. Adjustment Overview We combine Powder/water/concentration adjustment into one step We use the recommended powder & water
3. LCD shows ‘C 01’, means the 01 function, Press ‘+’again to go into concentration setting page.
4. User can find the milk powder package and choose a recommended powder& water amount In this
5. Step 1: Enter package powder amount Once gone into ‘C01’, the ‘g’led will blink, means you
6. Step 2: Adjust real powder amount User needs to weight the real powder in Step 1,
7. Step 3: Enter package water amount At this stage, the ‘ml’led will blink, means you have
8. Step 4: Adjust real water amount User needs to weight the real water amount in Step
9. Step 5: Exit Since the powder is adjusted and the setting amount is the recommended value,
10. Test Powder & Water Overview We create a separate function (C02 & C03) to test powder
11. LCD shows ‘C 01’, means the 01 function, Press ‘+’on the right side to switch to
12. In C02 mode, press ‘+’ ‘-’on the right side to adjust the amount of powder you
13. In C03 mode, press ‘+’ ‘-’on the right side to adjust the amount of water you
14. Other questions 1. It is necessary to make the temperature of the water in the tank
16. Скачать презентацию

Слайд 2

Adjustment Overview
We combine Powder/water/concentration adjustment into one step
We use the recommended

powder & water level on milk package to get the right concentration

Слайд 3

LCD shows ‘C 01’, means the 01 function,
Press ‘+’again to go

into concentration setting page.

Long Press”+”and Go into Setting mode

Слайд 4

User can find the milk powder package and choose a recommended

powder& water amount
In this case, the recommended powder is 17g, and water is 120ml
The concentration is 17g/120ml
What we will do next, is to test& set the powder to 17g, and water to 120ml, so that the concentration will be right

Слайд 5

Step 1: Enter package powder amount
Once gone into ‘C01’, the ‘g’led

will blink, means you have entered powder adjustment page.
Here, you need to enter the amount of powder shown on the back of powder package, in this case, you need to enter ‘17’
You can press the ‘+’and ‘-’on the right side to adjust the number
Press ‘Start’, and it will pour milk powder only.
Press ‘+’ and go into next step

Слайд 6

Step 2: Adjust real powder amount
User needs to weight the real

powder in Step 1, and enter it back into the device. For example, the real powder is 15g, and you need to enter 15 onto device.
You can press ‘+’and ‘-’on the right to adjust the number
Then, the milk powder is adjusted automatically
You can press ‘start’again to test if the real powder is correct, if it’s not, then you can adjust it until it’s right
Now, the powder is adjusted and tested.
Press ‘+’ and go into next step

Слайд 7

Step 3: Enter package water amount
At this stage, the ‘ml’led will

blink, means you have entered water setting page.
Here, you need to enter the amount of water shown on the back of powder package, in this case, you need to enter ‘120’
Press ‘Start’, and it will pour water only.
Press ‘+’ and go into next step

Слайд 8

Step 4: Adjust real water amount
User needs to weight the real

water amount in Step 3, and enter it back into the device. For example, the real powder is 118ml, and you need to enter 118 onto device.
You can press ‘+’and ‘-’to adjust the number
Then, the water is adjusted automatically
You can press ‘start’again to test if the water amount is correct, if it’s not, then you can adjust it until it’s right
Now, the water is adjusted and tested.

Слайд 9

Step 5: Exit
Since the powder is adjusted and the setting amount

is the recommended value, and the water is also adjusted, and the setting amount is also recommended value.
Then machine will have the right concentration adjusted at the same time
User can press ‘+’again to exit setting mode.
This way is the simplest way to test and set milk powder, water and concentration at the same time.

Слайд 10

Test Powder & Water Overview
We create a separate function (C02 &

C03) to test powder and water amount

Слайд 11

LCD shows ‘C 01’, means the 01 function,
Press ‘+’on the right

side to switch to C02 or C03
Press ‘+’on the left set to go into each mode

Long Press”+”and Go into Setting mode

Слайд 12

In C02 mode, press ‘+’ ‘-’on the right side to adjust

the amount of powder you want to get. Press ‘Start’to pour milk powder only.
If the result is not correct, then user needs to go to C01 mode to adjust

C02 Powder test mode

Слайд 13