How to install the Windows 7 on DOS version E10-30

Июль 25, 2022

Главная
Информатика
How to install the Windows 7 on DOS version E10-30

Содержание

2. I. Configure in the BIOS setup
3. Configure in the BIOS setup Picture 1-1 Select “Disabled” Step1: Power on your computer and press
4. Configure in the BIOS setup (Continue) Picture 1-2 Save and exit Step2: Press Fn+F10 saving changes
5. II. Install Windows 7
6. Picture 1-3 Boot from USB CD/DVD-ROM Plug USB CD/DVD-ROM with Windows 7 disk, power on your
7. Get XHCI Driver Copy XHCI driver from USB driver disk to HDD or download XHCI driver
8. III. Configure in the BIOS setup
9. Configure in the BIOS setup Picture 1-4 Select “Enabled” Step1: Power on your computer and press
10. Configure in the BIOS setup (Continue) Picture 1-5 Save and exit Step2: Press Fn+F10 saving changes
11. Install XHCI Driver Setp1:Power on and boot to win7 , there will appear an unknown device.
13. Скачать презентацию

Слайд 2

I. Configure in the BIOS setup

Слайд 3

Configure in the BIOS setup
Picture 1-1 Select “Disabled”
Step1: Power on

your computer and press Fn+F2 enter BIOS setup, Locate “Configuration” page, change “USB XHCI Controller” from “Enabled” to “Disabled” as picture 1-1.

Слайд 4

Configure in the BIOS setup (Continue)
Picture 1-2 Save and exit
Step2: Press

Fn+F10 saving changes and exit as picture 1-2.

Слайд 5

II. Install Windows 7

Слайд 6

Picture 1-3 Boot from USB CD/DVD-ROM
Plug USB CD/DVD-ROM with Windows 7

disk, power on your computer and press Fn+F12, select boot from USB CD/DVD-ROM as picture 1-3, and then start to Windows install.

Install Windows 7

Слайд 7

Get XHCI Driver
Copy XHCI driver from USB driver disk to

HDD or download XHCI driver from LENOVO official website to HDD

Слайд 8

III. Configure in the BIOS setup

Слайд 9

Configure in the BIOS setup
Picture 1-4 Select “Enabled”
Step1: Power on

your computer and press Fn+F2 enter BIOS setup, Locate “Configuration” page, change “USB XHCI Controller” from “Disabled” to “enabled” as picture 1-4.

Слайд 10

Configure in the BIOS setup (Continue)
Picture 1-5 Save and exit
Step2: Press

Fn+F10 saving changes and exit as picture 1-5.

Слайд 11

Install XHCI Driver
Setp1:Power on and boot to win7 , there will

appear an unknown device.
Step2:Using TP to double click XHCI driver setup file to install XHCI driver ,wait install complete
Step3:Reboot win7 and all USB ports can works.