Low-temperature EPR spectroscopy of high-spin cobalt complexes with unusual valence Co(III)

Слайд 2

Structural view of the synthesized complex Experimental methods and samples for

Structural view of the synthesized complex

Experimental methods and samples for research

Used

samples:
-powder in a vial filled with helium
-powder in the vacuum oil
-monocrystalline sample
Слайд 3

Results and discussion The EPR spectra of powder sample of Co(III)

Results and discussion

The EPR spectra of powder sample of Co(III) (T=15K)

.
1. Spectra without turning
2. Spectra rotate 90 degrees.
3. Spectra rotate 90 degrees.(repeat)
4. Spectra with the use of vacuum oil without turning.
(*- impurities from the glass).
Слайд 4

Results and discussion The EPR spectra of powder sample of Co(III)

Results and discussion

The EPR spectra of powder sample of Co(III) (blue)

and simulated spectrum (green)
The simulation parameters S = 2; D = 3.465, E = 0.0055; g=2; the Temperature Of 4.2 K.
Слайд 5

Results and discussion Research of the angular dependence, Temperature 16K. Experimental

Results and discussion

Research of the angular dependence, Temperature 16K.

Experimental spectra

Simulated

spectra
The simulation parameters:
S = 2; D = 3.4, E = 0.102 ; g=2;
Слайд 6

Results and discussion Powder spectra Crystalline spectrum, orientation of 0 degrees.

Results and discussion

Powder spectra
Crystalline spectrum, orientation of 0 degrees.
Crystalline spectrum, orientation

of 90 degrees.

Research of spectra of the crystalline sample (temperature 4.2 K )

Слайд 7

Conclusion For the observed data, it was concluded that the line

Conclusion

For the observed data, it was concluded that the line in

the area 100mТ on the ESR spectra of the crystalline sample belongs to our complex Co(III). This means that for accurate research of our we need accurate knowledge of its orientation.
Working with the powder sample, we spotted “torquing effect” , which was eliminated by using vacuum grease
In the future we will make more accurate simulation of the powder and crystal samples for accurate experimental determination of the magnetic parameters and their comparison with the results of quantum-chemical calculations.