Radiation dosimetry

Сентябрь 9, 2022

Главная
Химия
Radiation dosimetry

Содержание

2. Radiation quantities and units The basic radiation quantities are: exposure dose absorbed dose equivalent dose effective
3. Exposure = ionization air The old unit to measure exposure is roentgen (R), which is defined
4. Absorbed dose = energy/mass When ionizing radiation interacts with the human body, it gives its energy
5. One gray dose is equivalent to one joule radiation energy absorbed per kilogram of organ or
6. Equivalent dose The third important radiation quantity is the dose equivalent. Equal doses of all types
7. To account for this difference, radiation dose is expressed as equivalent dose in units of sievert
9. Equivalent dose is often referred to simply as “dose” in energy day of radiation terminology. The
10. 1Sv = 100 rem 1 rem = 10 mSv (millisievert = one thousandth of a sievert)
11. What effects do different doses of radiation have on people? One sievert is a large dose.
12. Here are some examples: 10 Sv – Risk of death within days or weeks 1 Sv
13. What are the limits of exposure to radiation? The Threshold Limit Values (TLVs) published by the
14. What is the relationship between SI units and non-SI units? Table 2 shows SI units (International
16. What is “committed dose?” When a radioactive material is gets in the body by inhalation or
17. What is an effective dose? The effective dose is the sum of weighting equivalent doses in
18. Tissue weighting factors (Table 3) represent relative sensitivity of organs for developing cancer.
21. ** The remainder is composed of the following additional tissues and organs: adrenal brain upper large
22. Integral dose Integral dose is the radiation quantity that is equal to the total energy absorbed
23. Measuring radiation by ionization methods Common types of wearable dosimeters for ionizing include: film badge dosimeter
24. Quartz fiber dosimeter A quartz fiber dosimeter, sometimes simply called a pocket dosimeter, is a pen
25. If the radiation is more or less constant, it is possible to measure the ionizing current.
26. A simple dosimeter of this type is a pocket or pen dosimeter. A capacitor is charged
28. Gold leaf electroscopeGold leaf electroscope showing principle of fiber dosimeter. When ionizing radiationGold leaf electroscope showing
29. Quartz fiber dosimeter
30. Quartz fiber dosimeter
32. Dosimeter charger Essential for recharging quartz fibre dosimeters.
33. Film badge dosimeter Film badge dosimeter, is a dosimeter used for monitoring exposure to ionizing radiation.
34. The film is removed and developed to measure exposure. The film is sensitive to radiation and,
35. Advantages: The film badge has several advantages over other types of dosimetry: permanent record of exposure
37. Film badge dosimeter
38. Thermoluminescent Dosimeter Thermoluminescent dosimeters (TLD) are often used instead of the film badge. Like a film
39. Advantages: The advantages of a TLD over other personnel monitors are its: linearity of response to
40. How it works A TLD is a phosphor, such as lithium fluoride (LiF) or calcium fluoride
41. Heating the crystal causes the crystal lattice to vibrate, releasing the trapped electrons in the process.
42. Instead of reading the optical density (blackness) of a film, as is done with film badges,
43. Thermoluminescent Dosimeter
44. Thermoluminescent Dosimeter
45. Dosimeter-radiometer The dosimeter-radiometer, which has many unique qualities: a thin graphical display, which shows the information
46. the dosimeter-radiometer generates sound signals to indicate the following events: — one or several particles detection;
47. Dosimeter-radiometer
48. The effects of radiation on the cell at the molecular level When radiation interacts with target
49. For direct actions, damage occurs as a result of ionization of atoms on key molecules in
50. However, when exist, as in high radiation fluence, orbital neutrality can be achieved by: hydrogen radical
51. Ionizing radiation DNA damage active enzymatic repair processes exist for the repair of both DNA base
52. residual unrejoined double strand breaks are lethal to the cell, whereas incorrectly recoined breaks may produce
55. Stochastic effects Stochastic effects are those that occur by chance and consist primarily of cancer and
56. In summary, stochastic effects are: totally random (occur by chance) appear in non-exposed persons as well
57. Non stochastic effects (acute) Unlike stochastic effects, non stochastic effects are characterized by a threshold dose
58. Examples of non stochastic effects include: erythema (skin reddening) skin and tissue burns cataract formation radiation
59. Summary of non stochastic effects: Threshold – a certain minimum dose must be exceeded before the
62. Teratogenic effects Teratogenic effects are effects from some agent that are seen in the offspring of
63. Somatic effects Somatic effects are effects from some agent, like radiation that are seen in the
64. Genetic effects Genetic effects are effects from some agent that are seen in the offspring of
65. This chest burn was produced when a powerful radiation source was placed in a shirt pocket.
66. This damage was caused by handling a powerful radiation source, without protection.
68. Скачать презентацию

Слайд 2

Radiation quantities and units
The basic radiation quantities are:
exposure dose
absorbed dose
equivalent

dose
effective dose
integral dose

Слайд 3

Exposure = ionization air
The old unit to measure exposure is

roentgen (R), which is defined in terms of the amount of ionization produced in air. The unit for exposure is based on change/mass of air (C/kg) (columb),
-4
where 1R=2.58 x 10 C/kg

Слайд 4

Absorbed dose = energy/mass
When ionizing radiation interacts with the human

body, it gives its energy to the body tissues. The amount of energy absorbed per unit weight of the organ or tissue is called absorbed dose and is expressed in units of gray (Gy).

Слайд 5

One gray dose is equivalent to one joule radiation energy absorbed

per kilogram of organ or tissue weight.
Rad is the old and still used of absorbed dose.

One gray is equivalent to 100 rads.
1Gy =100 rads

Слайд 6

Equivalent dose
The third important radiation quantity is the dose equivalent.
Equal

doses of all types of ionizing radiation are not equally harmful. Alpha particles produce greater harm than do beta particles, gamma rays and x rays for a given absorbed dose.

Слайд 7

To account for this difference, radiation dose is expressed as equivalent

dose in units of sievert (Sv).
The dose in SV is equal to “absorbed dose” multiplied by a “radiation weighting factor” (Wr – see table 1 below). Prior to 1990, this weighting factor was referred to as Quality Factor (QF).

Слайд 8

Слайд 9

Equivalent dose is often referred to simply as “dose” in energy

day of radiation terminology. The old unit of “dose equivalent” or “dose” was rem.
Dose in Sv = Absorbed Dose in Gy x radiation weighting factor (WR)
Dose in rem = Dose in rad x QF

Слайд 10

1Sv = 100 rem
1 rem = 10 mSv (millisievert = one

thousandth of a sievert)
1Gy air dose equivalent to 0.7 Sv tissue dose
1 R (roentgen) exposure is approximately equivalent to 10 mSv tissue dose

Слайд 11

What effects do different doses of radiation have on people?
One

sievert is a large dose. The recommended Threshold Limit Values (TLV) is average dose of 0.05 Sv (50 mSv).
The effects of being exposed to large doses of radiation at one time (acute exposure) vary with the dose.

Слайд 12

Here are some examples:
10 Sv – Risk of death within days

or weeks
1 Sv – Risk of cancer later in life (5 in 100)
100 mSv – Risk of cancer later in life (5 in 1000)
50 mSv – TLV annual dose for radiation workers in any one year
20 mSv – TLV for annual average dose, averaged over five years

Слайд 13

What are the limits of exposure to radiation?
The Threshold Limit

Values (TLVs) published by the ACGIH (American Conference of Governmental Industrial Hygienists) are used in many jurisdictions occupational exposure limits or guidelines:
20 mSv – TLV for average annual dose for radiation workers, averaged over five years
1 mSv – Recommended annual dose limit for general public (ICRP – International Commission on Radiological Protection).

Слайд 14

What is the relationship between SI units and non-SI units?
Table

2 shows SI units (International System of Units or System International quantities), the corresponding non-SI units, their symbols, and the conversion factors.

Слайд 15

Слайд 16

What is “committed dose?”
When a radioactive material is gets in

the body by inhalation or ingestion, the radiation dose constantly accumulates in an organ or a tissue. The total dose accumulated during the 50 years following the intake is called the committed dose. The quantity of committed dose depends on the amount of ingested radioactive material and the time it stays inside the body.

Слайд 17

What is an effective dose?
The effective dose is the sum

of weighting equivalent doses in an all the organs and tissue of the body.
Effective dose = sum of (organ doses x tissue weighting factor)

Слайд 18

Tissue weighting factors (Table 3) represent relative sensitivity of organs for

developing cancer.

Слайд 19

Слайд 20

Слайд 21

** The remainder is composed of the following additional tissues and

organs:
adrenal
brain
upper large intestine
small intestine
kidney
muscle
pancreas
spleen
thymus
uterus

Слайд 22

Integral dose
Integral dose is the radiation quantity that is equal

to the total energy absorbed by the body.
The SI unit for integral dose is the joule (the standard unit of energy), and the conventional unit is the gram-rad.

Слайд 23

Measuring radiation by ionization methods
Common types of wearable dosimeters for

ionizing include:
film badge dosimeter
thermoluminescent dosimeter
quartz fiber dosimeter

Слайд 24

Quartz fiber dosimeter
A quartz fiber dosimeter, sometimes simply called a

pocket dosimeter, is a pen like device that measures the dose of ionizing radiation.
The oldest accurate technique for measuring radiation involves measuring the charge produced by the radiation. This can be done in two different ways.

Слайд 25

If the radiation is more or less constant, it is possible

to measure the ionizing current. This is a dose rate meter. The results will be given in R/hour or a similar unit. If the exposure is short, as in the case of an X-ray exposure, all of the ionization charge is collected and measured. This is called an “integrating dosimeter”.

Слайд 26

A simple dosimeter of this type is a pocket or pen

dosimeter. A capacitor is charged to about 400 volts. As the air in the chamber is ionized by the radiation, the ions produced are collected and discharge the capacitor. The charge loss on the capacitor during a given time is a measure of the radiation exposure.
Most pen dosimeters include a simple electroscope to measure the remaining charge. They include a scale which indicates zero when fully charged. As it discharges, the scale shows the remaining voltage. The scale is calibrated to read directly in milliroentgens (mR).

Слайд 27

Слайд 28

Gold leaf electroscopeGold leaf electroscope showing principle of fiber dosimeter. When

ionizing radiationGold leaf electroscope showing principle of fiber dosimeter. When ionizing radiation penetrates the inner gasGold leaf electroscope showing principle of fiber dosimeter. When ionizing radiation penetrates the inner gas of the electroscope, ionsGold leaf electroscope showing principle of fiber dosimeter. When ionizing radiation penetrates the inner gas of the electroscope, ions are created. Since the gold leaves are charged positive, the negative ions are attracted to it and neutralize some of the charge, thus causing the gold leaves to close together.

Слайд 29

Quartz fiber dosimeter

Слайд 30

Quartz fiber dosimeter

Слайд 31

Слайд 32

Dosimeter charger Essential for recharging quartz fibre dosimeters.

Слайд 33

Film badge dosimeter
Film badge dosimeter, is a dosimeter used for

monitoring exposure to ionizing radiation.
The badge consists of two parts:
photographic film
holder

Слайд 34

The film is removed and developed to measure exposure.
The film is

sensitive to radiation and, once developed, exposed areas in optical density (i.e. blacken) in response to incident radiation. One badge may contain several films of different sensitivities or, more usually, a single film with multiple emulsion coatings. The combination of a low – sensitivity and high-sensitivity emulsion extends the dynamic range to several orders of magnitude. Wide dynamic range is highly desirable as it allows measurement of very large accidental exposures without degrading sensitivity to more usual low level exposure.

Слайд 35

Advantages:
The film badge has several advantages over other types of dosimetry:
permanent

record of exposure
radiation type detection – use of multiple filters allows separate measurement of beta and gamma exposure.

Слайд 36

Слайд 37

Film badge dosimeter

Слайд 38

Thermoluminescent Dosimeter
Thermoluminescent dosimeters (TLD) are often used instead of the

film badge. Like a film badge, it is worn for a period of time (usually 3 months or less) and then must be processed to determine the dose received, if any. Thermoluminescent dosimeters can measure doses as low as 1 millirem, but under routine conditions their low-dose capability is approximately the same as for film badges. TLDs have a precision of approximately 15% for low doses. This precision improves to approximately 3% for high doses.

Слайд 39

Advantages:
The advantages of a TLD over other personnel monitors are

its:
linearity of response to dose
relative energy independence
sensitivity to low doses
it is also reusable, which is an advantage over film badges
However, no permanent record or re-readability is provided and an immediate, on the job readout is not possible.

Слайд 40

How it works
A TLD is a phosphor, such as

lithium fluoride (LiF) or calcium fluoride (CaF), in a solid crystal structure. When a TLD is exposed to ionizing radiation at ambient temperatures, the radiation interacts with the phosphor crystal and deposits all or part of the incident energy in that material. Some of the atoms in the material that absorb that energy become ionized, producing free electrons and areas lacking one or more electrons, called holes. Imperfections in the crystal lattice structure act as sites where free electrons can become trapped and locked into place.

Слайд 41

Heating the crystal causes the crystal lattice to vibrate, releasing the

trapped electrons in the process. Released electrons return to the original ground state, releasing the captured energy from ionization as light, hence the name thermoluminescent. Released light is counted using photomultiplier tubes and the number of photons counted is proportional to the quantity of radiation striking the phosphor.

Слайд 42

Instead of reading the optical density (blackness) of a film, as

is done with film badges, the amount of light released versus the heating of the individual pieces of thermoluminescent material is measured. The "glow curve" produced by this process is then related to the radiation exposure. The process can be repeated many times.

Слайд 43

Thermoluminescent Dosimeter

Слайд 44

Thermoluminescent Dosimeter

Слайд 45

Dosimeter-radiometer
The dosimeter-radiometer, which has many unique qualities:
a thin graphical display,

which shows the information with maximum clarity.
the dosimeter’s measuring capabilities range from the natural background level up to 0.1 Sv/h; additional tests confirmed dose tolerance of «Swift» to up to 10 Sv/h!;
detects two radiation types – beta and gamma;

Слайд 46

the dosimeter-radiometer generates sound signals to indicate the following events:
— one

or several particles detection;
— exceeding the regulation threshold – dose, dose rate or flux density;
— the battery is getting low;
— the key is pressed;
convenient functions of light and dynamic (vibration) threshold alarm;
continuous monitoring of performance and residual capacity of batteries;

Слайд 47

Dosimeter-radiometer

Слайд 48

The effects of radiation on the cell at the molecular level
When

radiation interacts with target atoms, energy is deposited, resulting in ionization or excitation.
The absorption of energy from ionizing radiation produces damage to molecules by:
direct actions
indirect actions

Слайд 49

For direct actions, damage occurs as a result of ionization of

atoms on key molecules in the biological system. This causes inactivation or functional alteration of the molecule.
Indirect action involves the production of reactive free radicals whose toxic damage on the key molecule results in a biological effect. Free radicals readily recombine to electronic and orbital neutrality

Слайд 50

However, when exist, as in high radiation fluence, orbital neutrality can

be achieved by:
hydrogen radical dimerization (H2)
the formation of toxic hydrogen peroxide (H2O2)
the radical can also be transferred to an organic molecule in the cell

Слайд 51

Ionizing radiation DNA damage
active enzymatic repair processes exist for the

repair of both DNA base damage and strand breaks, in many cases breaks in the double-strand DNA can be repaired by the enzymes, DNA polymerase, and DNA ligase
the repair of double strand breaks is a complex process involving recombinational evens, depending upon the nature of the initial break

Слайд 52

residual unrejoined double strand breaks are lethal to the cell, whereas

incorrectly recoined breaks may produce important mutagenic lesions, in many cases, this DNA disrepair apparently leads to DNA deletions and rearrangements; such large-scale changes in DNA structure are characteristic of most radiation induced mutations

Слайд 53

Слайд 54

Слайд 55

Stochastic effects
Stochastic effects are those that occur by chance and

consist primarily of cancer and genetic effects. Stochastic effects often show up years after exposure. As the dose to an individual increases, the probability that cancer or a genetic effect will occur also increases. However, at no time, even for high doses, is it certain that cancer or genetic damage will result. Similarly, for stochastic effects, there is no threshold dose below which it is relatively certain that an adverse effect cannot occur. In addition, because stochastic effects can occur in individuals that have not been exposed to radiation above background levels, it can never be determined for certain that an occurrence of cancer or genetic damage was due to a specific exposure.

Слайд 56

In summary, stochastic effects are:
totally random (occur by chance)
appear in non-exposed

persons as well as exposed persons
no threshold – any dose can cause an effect
the likelihood of an effect increases as the radiation dose increases, but a single photon can cause an effect
the severity of the response is independent of the dose ( the severity of cancer is not associated with the amount of dose received. You are more likely to get cancer if you receive a higher dose, but the severity of the disease is not based on the dose)

Слайд 57

Non stochastic effects (acute)
Unlike stochastic effects, non stochastic effects are

characterized by a threshold dose below which they do not occur. In other words, non stochastic effects have a clear relationship between the exposure and the effect. In addition, the magnitude of the effect is directly proportional to the size of the dose. Non stochastic effects typically result when very large dosages of radiation are received in a short amount of time. These effects will often be evident within hours or days.

Слайд 58

Examples of non stochastic effects include:
erythema (skin reddening)
skin and tissue burns
cataract

formation
radiation sickness
Death
Each of these effects differs from the others in that both its threshold dose and the time over which the dose was received cause the effect.

Слайд 59

Summary of non stochastic effects:
Threshold – a certain minimum dose must

be exceeded before the particular effect is observed. Because of this minimum dose, the non stochastic effects are also called Threshold Effects. The threshold may differ from individual to individual.
The severity of the effect increases with the size of the dose received by the individual. More dose more severe effect)
There is a clear relationship between exposure to radiation and the observed effect on the individual.

Слайд 60

Слайд 61

Слайд 62

Teratogenic effects
Teratogenic effects are effects from some agent that are

seen in the offspring of the individual who received the agent. The agent must be encountered during gestation period.

Слайд 63

Somatic effects
Somatic effects are effects from some agent, like radiation

that are seen in the individual who receives the agent.

Слайд 64

Genetic effects
Genetic effects are effects from some agent that are

seen in the offspring of the individual who received the agent. The agent must be encountered pre-conception.

Слайд 65

This chest burn was produced when a powerful radiation source

was placed in a shirt pocket.

Слайд 66

This damage was caused by handling a powerful radiation source, without

protection.

Radiation dosimetry

Содержание

Radiation quantities and unitsThe basic radiation quantities are:exposure doseabsorbed doseequivalent

Exposure = ionization airThe old unit to measure exposure is

Absorbed dose = energy/massWhen ionizing radiation interacts with the human

One gray dose is equivalent to one joule radiation energy absorbed

Equivalent doseThe third important radiation quantity is the dose equivalent.Equal

To account for this difference, radiation dose is expressed as equivalent

Equivalent dose is often referred to simply as “dose” in energy

1Sv = 100 rem1 rem = 10 mSv (millisievert = one

What effects do different doses of radiation have on people?One

Here are some examples:10 Sv – Risk of death within days

What are the limits of exposure to radiation?The Threshold Limit

What is the relationship between SI units and non-SI units? Table

What is “committed dose?”When a radioactive material is gets in

What is an effective dose?The effective dose is the sum

Tissue weighting factors (Table 3) represent relative sensitivity of organs for

** The remainder is composed of the following additional tissues and

Integral doseIntegral dose is the radiation quantity that is equal

Measuring radiation by ionization methodsCommon types of wearable dosimeters for

Quartz fiber dosimeterA quartz fiber dosimeter, sometimes simply called a

If the radiation is more or less constant, it is possible

A simple dosimeter of this type is a pocket or pen

Gold leaf electroscopeGold leaf electroscope showing principle of fiber dosimeter. When

Quartz fiber dosimeter

Quartz fiber dosimeter

Dosimeter charger Essential for recharging quartz fibre dosimeters.

Film badge dosimeterFilm badge dosimeter, is a dosimeter used for

The film is removed and developed to measure exposure.The film is

Advantages:The film badge has several advantages over other types of dosimetry:permanent

Film badge dosimeter

Thermoluminescent DosimeterThermoluminescent dosimeters (TLD) are often used instead of the

Advantages: The advantages of a TLD over other personnel monitors are

How it works A TLD is a phosphor, such as

Heating the crystal causes the crystal lattice to vibrate, releasing the

Instead of reading the optical density (blackness) of a film, as

Thermoluminescent Dosimeter

Thermoluminescent Dosimeter

Dosimeter-radiometerThe dosimeter-radiometer, which has many unique qualities:a thin graphical display,

the dosimeter-radiometer generates sound signals to indicate the following events: — one

Dosimeter-radiometer

The effects of radiation on the cell at the molecular levelWhen

For direct actions, damage occurs as a result of ionization of

However, when exist, as in high radiation fluence, orbital neutrality can

Ionizing radiation DNA damageactive enzymatic repair processes exist for the

residual unrejoined double strand breaks are lethal to the cell, whereas

Stochastic effectsStochastic effects are those that occur by chance and

In summary, stochastic effects are:totally random (occur by chance)appear in non-exposed

Non stochastic effects (acute)Unlike stochastic effects, non stochastic effects are

Examples of non stochastic effects include:erythema (skin reddening)skin and tissue burnscataract

Summary of non stochastic effects:Threshold – a certain minimum dose must

Teratogenic effectsTeratogenic effects are effects from some agent that are

Somatic effectsSomatic effects are effects from some agent, like radiation

Genetic effectsGenetic effects are effects from some agent that are

This chest burn was produced when a powerful radiation source

This damage was caused by handling a powerful radiation source, without

Похожие презентации

Radiation quantities and units
The basic radiation quantities are:
exposure dose
absorbed dose
equivalent

Exposure = ionization air
The old unit to measure exposure is

Absorbed dose = energy/mass
When ionizing radiation interacts with the human

Equivalent dose
The third important radiation quantity is the dose equivalent.
Equal

1Sv = 100 rem
1 rem = 10 mSv (millisievert = one

What effects do different doses of radiation have on people?
One

Here are some examples:
10 Sv – Risk of death within days

What are the limits of exposure to radiation?
The Threshold Limit

What is the relationship between SI units and non-SI units?
Table

What is “committed dose?”
When a radioactive material is gets in

What is an effective dose?
The effective dose is the sum

Integral dose
Integral dose is the radiation quantity that is equal

Measuring radiation by ionization methods
Common types of wearable dosimeters for

Quartz fiber dosimeter
A quartz fiber dosimeter, sometimes simply called a

Film badge dosimeter
Film badge dosimeter, is a dosimeter used for

The film is removed and developed to measure exposure.
The film is

Advantages:
The film badge has several advantages over other types of dosimetry:
permanent

Thermoluminescent Dosimeter
Thermoluminescent dosimeters (TLD) are often used instead of the

Advantages:
The advantages of a TLD over other personnel monitors are

How it works
A TLD is a phosphor, such as

Dosimeter-radiometer
The dosimeter-radiometer, which has many unique qualities:
a thin graphical display,

the dosimeter-radiometer generates sound signals to indicate the following events:
— one

The effects of radiation on the cell at the molecular level
When

Ionizing radiation DNA damage
active enzymatic repair processes exist for the

Stochastic effects
Stochastic effects are those that occur by chance and

In summary, stochastic effects are:
totally random (occur by chance)
appear in non-exposed

Non stochastic effects (acute)
Unlike stochastic effects, non stochastic effects are

Examples of non stochastic effects include:
erythema (skin reddening)
skin and tissue burns
cataract

Summary of non stochastic effects:
Threshold – a certain minimum dose must

Teratogenic effects
Teratogenic effects are effects from some agent that are

Somatic effects
Somatic effects are effects from some agent, like radiation

Genetic effects
Genetic effects are effects from some agent that are